The Garmin CHIRP Difference – The built-in sonar capabilities of echoMAP 45cv include CHIRP sonar, the most sophisticated sonar technology available for the fishing and boating public. CHIRP sonar provides amazingly clear target separation and definition because it puts even more energy onto the target than traditional sonar. It also includes sonar-recording capability that coordinates the timing of the sonar return with your boat’s position and saves digital information for playback on a computer using HomePort™ planning software. Use the user data sharing cable to share waypoints and routes between multiple devices.
Preloaded UK, Ireland and North West mainland Europe coast maps – Preloaded with Garmin’s highly detailed BlueChart G2 mapping covering the British Isles in their entirety, including the Thames Estuary, Caledonian Canal, Outer Hebrides, Shetland and Orkney Islands, Isle of Wight, Isle of Man, Lough Neagh, The Shannon river (up to Lough Kee) and the Irish Sea. Continental coverage from Brest, FR to Kiel, DE including the Channel Islands, the Waddenzee, the IJsselmeer, the canals of The Netherlands, the Meuse River to Liege, BE; the Rhine River to Dusseldorf, DE and the Kiel Canal.
Enhanced Auto Guidance – Just enter the location where you want to go and patented Garmin Auto Guidance technology instantly searches through relevant charts to create a safe, virtual pathway on the display that helps you avoid low bridges, shallow water and other charted obstructions en route. With enhanced Version 2.0, you have access to more features and capabilities. You’re able to adjust the calculated Auto Guidance pathway by inserting “via” points at interim stops or landmarks along your desired route. You can easily review hazard points along your calculated path. And you can even engage your compatible Garmin autopilot to follow the Auto Guidance route, automatically. Other 2.0 enhancements give you the ability to calculate arrival times at any point on your route (great for timing arrivals to correspond with bridge openings and other time-critical events). Better still, you can now save your plotted Auto Guidance paths for future navigation by backing them up on an SD™ card with your BlueChart g2 Vision².
²BlueChart g2 Vision SD card is required for this technology.
4.3”, display with built-in 5Hz GPS receiver plus AIS and DSC Support
Built-in HD-ID™, Traditional and ClearVü™ scanning sonar with CHIRP technology
NMEA 0183 compatible
microSD™ card slot
Transmit power: 500 W (RMS), 4,000 W (peak-to-peak)
BlueChart® g2 & g2 Vision® compatible
Quickdraw™ Contours compatible
Quick-Release mount – or unit can be flushmounted
Note – Garmin Transducer model GT20TM is supplied as part of this combo package as follows: Transom Mount ClearVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer for depth and temperature
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer.
This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 (ClearVü); and a 0 to 70 transom angle.
Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
Weight: 0.73 lbs. (0.33 kg)
Cable length: 20’
Number of pins on connector: 4
Transducer: 5.9 x 2.0 x 0.9 in (150 x 52 x 22 mm)
Traditional: 77/200 kHz
ClearVü: CHIRP 435-475 kHz and CHIRP 800-840 kHz
Traditional: 500 W
ClearVü: 500 W
Traditional: 1,900 ft
ClearVü: 750 ft
Beam Width (°) LF/HF (-3dB):
Read water temperature: Yes