Garmin genuine P79 In hull Depth Transducer, 200/50Khz, 10327 with 8-pin plug

£166.35

Brand new and boxed genuine Garmin Depth Transducer, 200/50Khz, 14/45deg, plastic, adjustable, in-hull mount with 8-pin connector

Compare

Description

Description

Garmin’s entry level in-hull transducer with an adjustable deadrise angle makes for easy installation.

The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 KHZ ; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.

The Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Note : Fiberglass should be no more than 5/8″ thick. Not recommended for cored hulls.

Features

  • Our entry level in-hull transducer with an adjustable deadrise angle makes installation a snap
  • Depth: 800 – 1,200 ft
  • Operating frequency: 50 – 200 KHZ
  • Beamwidth: 45 – 12 degrees
  • Deadrise: 0 – 22 degree.

Typical usage: Inboard/outboard or jet-powered boats; fibreglass hulls.

This is the new version of this transducer with the 8-pin connector – check your requirement before ordering this product.

These Transducers are suitable for most of the new range of Garmin Chartplotters and Fishfinders inc 557xs, 751xs, 820xs, 1020xs etc, echoMAP series inc. 50s, 70s, 50dv, 70dv etc and for Sounder Box GSD24.

It is NOT suitable for older products such as 188, 188C, 235 and 298 sounders, the 420s, 430s, 440s, 450s, 451s, 520s, 525s, 530s, 535s, 540s, 545s, 550s, 551s, 555s, 556s, FF160C, 178C, 250, 250C, 300C, 320C, 340C, 400C, Sounder Boxes GSD20, 21 & 22 or Network Expander GMS10.

Reviews

There are no reviews yet.

Be the first to review “Garmin genuine P79 In hull Depth Transducer, 200/50Khz, 10327 with 8-pin plug”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.