Garmin’s plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.Do not use on wood hulls.
This 8-pin 600 W transducer has a maximum depth of 800 to 1,200 ft; an operating frequency of 50 to 200 KHZ ; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.
The Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
- Plastic thru-hull mount transducer
- Performs well at high speeds and is an excellent choice for fiberglass and metal hulls.
- Depth: 800 – 1,200 ft
- Operating frequency: 50 – 200 KHZ
- Beamwidth: 45 – 12 degrees
- Deadrise: 0 – 7 degree
- 50/200 KHZ
Typical usage: Inboard/outboard or jet-powered boats; fibreglass hulls.
This is the new version of this transducer with the 8-pin connector – check your requirement before ordering this product.
These Transducers are suitable for most of the new range of Garmin Chartplotters and Fishfinders inc 557xs, 751xs, 820xs, 1020xs etc, echoMAP series inc. 50s, 70s, 50dv, 70dv etc and for Sounder Box GSD24.
It is NOT suitable for older products such as 188, 188C, 235 and 298 sounders, the 420s, 430s, 440s, 450s, 451s, 520s, 525s, 530s, 535s, 540s, 545s, 550s, 551s, 555s, 556s, FF160C, 178C, 250, 250C, 300C, 320C, 340C, 400C, Sounder Boxes GSD20, 21 & 22 or Network Expander GMS10.