Garmin’s entry level in-hull transducer with an adjustable deadrise angle makes installation a cinch.
The 6-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 KHZ ; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
This transducer kit comes with full installation instructions. Follow the instructions carefully to avoid damaging your boat.
Note: Fiberglass should be no more than 5/8″ thick. Not recommended for cored hulls.
- Entry level in-hull transducer with an adjustable deadrise angle makes for easy installation
- Depth: 800 – 1,200 ft
- Operating frequency: 50 – 200 KHZ
- Beamwidth: 45 – 12 degrees
- Deadrise: 0 – 22 degree.
Typical usage: Inboard/outboard or jet-powered boats; fibreglass hulls.
This Transducer with the 8pin to 6pin converter supplied is suitable for some of the current range of Garmin Chartplotters and Fishfinders and many of the recently discontinued products inc. 188, 188C, 235 and 298 sounders, the 420s, 421s, 430s, 440s, 450s, 451s, 520s, 525s, 530s, 535s, 540s, 545s, 550s, 551s, 555s, 556s, FF160C, 178C, 250, 250C, 300C, 320C, 340C, 400C, Sounder Boxes GSD20, 21 & 22 and Network Expander GMS10.